Luxon lightweight 4-post bar mounts eliminate twisting due to small crashes and tip-overs without sacrificing vibration absorption like a solid mount would. Four sets of bushings absorb hard hits and track roughness without compromising steering precision. Three different rubber bushing sets (soft, medium, and firm) are included to fine tune the feel.

These mounts fit stock triple clamps with the KTM rubber cone interface, which includes many KTM, Husqvarna, and GasGas models as well as all Luxon Gen2 triple clamps. They have the same bar position geometry as stock KTM (height and offset). The mounts are the stock KTM height of 25mm (bottom of bar to top of triple clamp) and stock KTM offset (7mm of bar position change when flipping the mounts around). 

Kit Includes:

• Rubber isolated lower bar mounts
• Rubber bushings
• Upper bar clamps
  
• High-strength steel clamp bolts
• Anti-seize
• Instruction manual.

Three different hardness levels of rubber bushings are included at no additional cost. Soft (green) is for lighter riders, vet riders, or those with wrist injuries. Medium (yellow) is recommended for most off-road and motocross use, and hard (red) is recommended for aggressive motocross use and faster riders. It is also possible to mix different hardness levels of top and bottom bushings (for example, medium uppers with hard lowers) for further tuning.

Bushings will "break in" on the first ride and become a little softer than when first installed. Like all rubber bushings, these are wear items and will eventually break down and need replacing. Softer bushings will need to be replaced more often than harder bushings. Replacement bushings are available here.

Depending on the installation type, make and model of bike, bar mount position, etc., you may need to lightly trim plastic brackets and/or relocate hour meters or accessories to allow clearance for these bar mounts in some mount positions (typically not an issue on motocross bike installations).

BAR SIZE:

Luxon 1 1/8" bar mounts fit standard 1 1/8" (28.6 mm) handlebars (sometimes called fatbars) and Luxon 36mm mounts fit the Renthal FB36 bars (36 mm). These are NOT the same as fatbars, they have a much larger clamping diameter. Luxon do not offer bar mounts to fit the old 7/8" size handlebars. Other aftermarket companies offer adapter bushings to fit the 7/8" bar diameter in standard 1 1/8" mounts if necessary.

* PLEASE NOTE THESE BAR MOUNTS ARE FOR RENTHAL FB36 (36MM BARS) NOT REGULAR FATBAR *

If you require standard 1 1/8" bar mounts - click here.

SPECIFICATIONS

WEIGHT (1 1/8") 417 g, 0.92 lbs
WEIGHT (36 MM) 449 g, 0.99 lbs
STOCK WEIGHT (2023+ model) 436 g, 0.96 lbs

BIKE FITMENT

GASGAS

• EC 125 2025
• EC 250 2024-2025
• EC 250F 2024-2025
• EC 300 2024-2025
• EC 350F 2024-2025
• EC 450F 2024-2025
  
• EC 500F 2024-2025
• EX 250 2024
• EX 250F 2024-2025
• EX 300 2024-2025
• EX 350F 2024-2025
• EX 450F 2024
• MC 125 2024-2025
• MC 150 2025
• MC 250 2024-2025
• MC 250F 2024-2025
• MC 300 2025
• MC 350F 2024-2025
• MC 450F 2024-2025

HUSQVARNA

• FC250 2016-2025
• FC350 2016-2025
• FC450 2016-2025
• FE250 2024-2025
• FE350 2024-2025
• FE350 PRO 2024-2025
• FE450 2024-2025
• FE501 2024-2025
• FX350 2017-2025
• FX450 2017-2024
• TC125 2016-2025
• TC150 2025
• TC250 2016-2025
• TC300 2025
• TE125i 2025
• TE150i 2024-2025
• TE250i 2024-2025
• TE300 PRO 2024-2025
• TE300i 2024-2025
  
• TX300 2017-2019
• TX300i 2020-2025

KTM

• 125 SX 2016-2025
• 125 XC 2023
• 125 XC TBI 2024-2025
• 125 XC-W 2017-2018
• 150 EXC TBI 2024-2025 
• 150 SX 2016-2022, 2025
• 250 EXC-F 2024-2025
• 250 EXC TBI 2024-2025 
• 250 SX 2016-2025
  
• 250 SXF 2016-2025
  
• 250 XC TBI 2024-2025
• 250 XC TPI 2020-2023
• 250 XC-F 2016-2025
• 300 EXC TBI 2024-2025 
• 300 SX 2023-2025
  
• 300 XC TBI 2024-2025
• 300 XC TPI 2020-2023
  
• 350 EXC-F 2024-2025 
• 350 SXF 2016-2025
  
• 350 XC-F 2016-2025
  
• 450 EXC-F 2024-2025 
• 450 SXF 2016-2025
• 450 XC-F 2016-2025
• 500 EXC-F 2024-2025

TRIUMPH

• TF 250-X 2024-2025
• TF 450-RC 2025

The KTM Cone interface is a tapered cone shaped hole on the top and bottom of the triple clamp (a cross section would look like an hour glass). The 2023+ version is identical to the 2016-2022 version, except it includes a counterbore for a flange on the top. Luxon bar mounts fit either version: they do not interface with the flange cutout, but rather the cone surface as it is more accurately machined and stronger.

ADDITIONAL INFORMATION

VIEW INSTALLATION INSTRUCTIONS HERE