NOCO GENIUS 2 BATTERY CHARGER FOR LEAD ACID 6V, 12V & 12.8V LITHIUM BATTERIES
NOCO Genius 2 UltraSafe Smart Battery Charger & Maintainer for 6V & 12V Lead Acid Series and 12.8V Lithium [LiFePO4] Batteries.
Meet the GENIUS2 - Similar to our G1100, just better. It's 31% smaller and delivers over 82% more power. And it's simpler and easier to use than ever before. Plug-in, connect to the battery, select a charge mode, and start charging your battery. A fully-automatic, worry-free battery charger for year-round use. Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.
CHARGE DOWN TO ZERO VOLTS.
Charge dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts.
BRING BATTERIES BACK TO LIFE.
Built-in desulfation mode for the most corroded batteries. Auto detection with smart diagnostic indicators starts a Repair Mode integrated within a 9-step charging profile.
THERMAL COMPENSATION.
An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
WORRY-FREE CHARGING.
Provides all-season, all-weather charging for a healthy battery. Leave plugged in 24/7 with no worries of overcharging. Automatically returns to its last selected mode.
- The supplied battery X-Connection Lead Set is convertible from clamp style end to eyelet type (6.5mm fitting) for attaching direct to the battery terminal post.
Simply remove the Allen screw on each clamp [3mm Allen Key required] to access the eyelet end. - The DCV inline X-Connect plug connector allows the NOCO Genius charger to be quickly disconnected or reconnected when required.
- The Genius 2 Charger AC cable length is 182cm, the DC cable length is 142cm and the X-Connect lead set is 55cm = 379cm [maximum attachment range].
- Replacement Lead Sets are available as an optional accessory for replacing lost connector or adding an additional set to another battery / motorcycle for easy charging.
- Designed for Australian 240 Volts 50Hz power point socket.
-
Warranty : NOCO Three (3) Year Limited Warranty applies.
Note - Supplied with a User Guide & Warranty Information booklets.

TECHNICAL SPECIFICATIONS
Line Voltage AC: 120-240 VAC, 50-60Hz
Output Power: 30 Watts Max
Charging Voltage: Various
Charging Current: 2A (12V), 2A (6V)
Chemistry: Lead-Acid and Lithium
Operating Temperature: -4° to 104° F (-20° to +40° C)
Storage Temperature: -22° to 140° F (-30° to +60° C)
Low-Voltage Detection: 1V (12V), 1V (6V)
DC Cable Length: 77.6 Inches
AC Cable Length: 71.7 Inches
Back Current Drain: <5mA
Battery Capacity: Up to 40Ah, Maintains All Battery Sizes
Housing Protection: IP65
Dimensions (LxWxH): 3.7 x 2.4 x 1.7 Inches
Unit Weight: 1.1 lbs
Cooling: Natural Convection


Product Information
Product Information
Shipping & Returns
Shipping & Returns





NOCO GENIUS 2 BATTERY CHARGER FOR LEAD ACID 6V, 12V & 12.8V LITHIUM BATTERIES
NOCO GENIUS 2 BATTERY CHARGER FOR LEAD ACID 6V, 12V & 12.8V LITHIUM BATTERIES
NOCO Genius 2 UltraSafe Smart Battery Charger & Maintainer for 6V & 12V Lead Acid Series and 12.8V Lithium [LiFePO4] Batteries.
Meet the GENIUS2 - Similar to our G1100, just better. It's 31% smaller and delivers over 82% more power. And it's simpler and easier to use than ever before. Plug-in, connect to the battery, select a charge mode, and start charging your battery. A fully-automatic, worry-free battery charger for year-round use. Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.
CHARGE DOWN TO ZERO VOLTS.
Charge dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts.
BRING BATTERIES BACK TO LIFE.
Built-in desulfation mode for the most corroded batteries. Auto detection with smart diagnostic indicators starts a Repair Mode integrated within a 9-step charging profile.
THERMAL COMPENSATION.
An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
WORRY-FREE CHARGING.
Provides all-season, all-weather charging for a healthy battery. Leave plugged in 24/7 with no worries of overcharging. Automatically returns to its last selected mode.
- The supplied battery X-Connection Lead Set is convertible from clamp style end to eyelet type (6.5mm fitting) for attaching direct to the battery terminal post.
Simply remove the Allen screw on each clamp [3mm Allen Key required] to access the eyelet end. - The DCV inline X-Connect plug connector allows the NOCO Genius charger to be quickly disconnected or reconnected when required.
- The Genius 2 Charger AC cable length is 182cm, the DC cable length is 142cm and the X-Connect lead set is 55cm = 379cm [maximum attachment range].
- Replacement Lead Sets are available as an optional accessory for replacing lost connector or adding an additional set to another battery / motorcycle for easy charging.
- Designed for Australian 240 Volts 50Hz power point socket.
-
Warranty : NOCO Three (3) Year Limited Warranty applies.
Note - Supplied with a User Guide & Warranty Information booklets.

TECHNICAL SPECIFICATIONS
Line Voltage AC: 120-240 VAC, 50-60Hz
Output Power: 30 Watts Max
Charging Voltage: Various
Charging Current: 2A (12V), 2A (6V)
Chemistry: Lead-Acid and Lithium
Operating Temperature: -4° to 104° F (-20° to +40° C)
Storage Temperature: -22° to 140° F (-30° to +60° C)
Low-Voltage Detection: 1V (12V), 1V (6V)
DC Cable Length: 77.6 Inches
AC Cable Length: 71.7 Inches
Back Current Drain: <5mA
Battery Capacity: Up to 40Ah, Maintains All Battery Sizes
Housing Protection: IP65
Dimensions (LxWxH): 3.7 x 2.4 x 1.7 Inches
Unit Weight: 1.1 lbs
Cooling: Natural Convection


Original: $64.93
-65%$64.93
$22.73Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
NOCO Genius 2 UltraSafe Smart Battery Charger & Maintainer for 6V & 12V Lead Acid Series and 12.8V Lithium [LiFePO4] Batteries.
Meet the GENIUS2 - Similar to our G1100, just better. It's 31% smaller and delivers over 82% more power. And it's simpler and easier to use than ever before. Plug-in, connect to the battery, select a charge mode, and start charging your battery. A fully-automatic, worry-free battery charger for year-round use. Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.
CHARGE DOWN TO ZERO VOLTS.
Charge dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts.
BRING BATTERIES BACK TO LIFE.
Built-in desulfation mode for the most corroded batteries. Auto detection with smart diagnostic indicators starts a Repair Mode integrated within a 9-step charging profile.
THERMAL COMPENSATION.
An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
WORRY-FREE CHARGING.
Provides all-season, all-weather charging for a healthy battery. Leave plugged in 24/7 with no worries of overcharging. Automatically returns to its last selected mode.
- The supplied battery X-Connection Lead Set is convertible from clamp style end to eyelet type (6.5mm fitting) for attaching direct to the battery terminal post.
Simply remove the Allen screw on each clamp [3mm Allen Key required] to access the eyelet end. - The DCV inline X-Connect plug connector allows the NOCO Genius charger to be quickly disconnected or reconnected when required.
- The Genius 2 Charger AC cable length is 182cm, the DC cable length is 142cm and the X-Connect lead set is 55cm = 379cm [maximum attachment range].
- Replacement Lead Sets are available as an optional accessory for replacing lost connector or adding an additional set to another battery / motorcycle for easy charging.
- Designed for Australian 240 Volts 50Hz power point socket.
-
Warranty : NOCO Three (3) Year Limited Warranty applies.
Note - Supplied with a User Guide & Warranty Information booklets.

TECHNICAL SPECIFICATIONS
Line Voltage AC: 120-240 VAC, 50-60Hz
Output Power: 30 Watts Max
Charging Voltage: Various
Charging Current: 2A (12V), 2A (6V)
Chemistry: Lead-Acid and Lithium
Operating Temperature: -4° to 104° F (-20° to +40° C)
Storage Temperature: -22° to 140° F (-30° to +60° C)
Low-Voltage Detection: 1V (12V), 1V (6V)
DC Cable Length: 77.6 Inches
AC Cable Length: 71.7 Inches
Back Current Drain: <5mA
Battery Capacity: Up to 40Ah, Maintains All Battery Sizes
Housing Protection: IP65
Dimensions (LxWxH): 3.7 x 2.4 x 1.7 Inches
Unit Weight: 1.1 lbs
Cooling: Natural Convection




















